Took most of the Memorial Day holiday weekend to accomplish finishing all of the turnout controls installation complete with all control cables and turnout frogs wired up.
A full view of the underside of the module give a good perspective of the complexity of this setup.
All of the wiring is color coded to assure that the connections would be consistent. Of course, I also used a ohm-meter to double check that all of the frogs were wired up to the proper polarity.
I'm planning to install some form of "cover" to protect the controls from damage when handling the module during transport and setup.
Some additional views are provided below.
At this point, only the two mainlines are fully wired for power. The yard section, as a whole, is isolated and I'll soon be adding the wiring to power it as a separate district. I've already received the SPROG DCC products to set up the inside mainline with the yard with DCC, so the next step will be to hook it all up and confirm that everything works. Remember, the outside mainline, the passenger side of things, will remain DC powered for now.