The back section of the yard will all be horizontal mount controls so that the pushed in knobs will result in the points being "pushed" away from the operator. Here is a view of the six turnout controls installed on the module.
The wires that are visible are connected to the frog of each of the turnouts and they will eventually be attached to the electric switch of each turnout control. In some cases the wires are a bit too short so I'll have to extend the wire in order to reach the switch.
Notice in the middle of this view where there were two turnouts situated somewhat close to each other, I had to come in from opposing sides with the controls in order to make it all fit.