All of the main track lines are now installed. There remains some stubs to install but for now I'm holding off on those until after I figure out what structures and details around those stubs are to be located before finalizing the track positions.
Getting all of these yard tracks in place was a bit tedious and I had to take care as to maintain the smooth curves as I systematically worked through each line starting with the outer most track and working my way toward the inner most track. These tracks are held in place using CA glue added under the ties about every 3 inches or so, allowing each glued portion to set before working around the curve toward eventually hooking up with the straight sections in the back of the yard. I used a spacer (my old Micro Trains rerailer did the trick:o) to maintain the desired separation between the track lines.
Those yard siding stubs on the right have yet to be extended to their final length. I'll extend them once I finalize how I'm going to end them with regard to the end-of-line bumpers.
Another view of the completed track installation is shown on the right. The passenger station section is to the right of the backdrop divider and what can be seen of the freight yard is to the left.
Finally, below is a view of the section of the yard where I've yet to install the stubs.
